INSTALLING YOUR KEY FOB #

If you are installing a new Key Fob, or reinstalling a Key Fob that was removed, it can be (re)added through your Keypad.

1. Press Menu, enter your Master PIN, and open Devices.
2. Select Add device.
3. Scroll down to Key Fob, and click Add.
4. Press and hold the red panic button located on the top of the Key Fob for 2 seconds, and release to add the component to your system.
5. Name your Key Fob.

You can also follow these steps to ensure your Key Fob is properly paired with your system when you are experiencing issues with your Key Fob.

DIFFERENT KEY FOB FUNCTIONS #

You may select the function of the panic button on your Key Fob(s) from the Keypad as well.

1. Press Menu, enter your Master PIN, and open Devices.
2. Select the Key Fob you wish to modify.
3. Scroll down, and select Panic Alarm.
4. You can choose between Panic – audible, Fire, and Medical.
5. Once you have decided who you want your Key Fob panic button to alert, make sure the selection is highlighted, and click Set.
6. Repeat steps 2-5 if you want to change the function of the panic button on all of your Key Fobs.

NAMING YOUR KEY FOB #

You have the option to name your Key Fob(s) during installation, however if you prefer to name your Key Fob(s) after installation you can do so by re-entering the Setup and Naming mode on your Keypad.

1. Go to Menu, enter your Master PIN, and select Setup and Naming.
2. Hold down the panic button on your Key Fob.
3. You will be prompted to name your Key Fob.

We recommend putting the Key Fob on a keychain you carry, so that you can use it as a remote method of arming and disarming your system.